SB-RVK

MPPT Charge Controller and Remote Display Kit

Starting at $430

Buy Now

The SB-RVK solar kits family, featuring our patented MPPT technology, is the ideal solution for RVs and Marine applications with its auxiliary output for charging a second battery and a flush-mounting remote display (IPN ProRemote or ProTouch) for full data monitoring. With the remote display, the solar kit is fully programmable for any type of battery and provides full battery and solar system data. Fast to install and easy to use!

SB-RVK kit composed of MPPT charge controller SB3024iL and IPN ProRemote display(1)
SB-RVK-S kit composed of MPPT charge controller SB3024iL and IPN ProRemote-S display with 500A/50mV current shunt(1,2)
SB-RVK-PT kit composed of MPPT charge controller SB3024iL and ProTouch touchscreen display(1)
SB-RVK-PT-S kit composed of MPPT charge controller SB3024iL and ProTouch-S touchscreen display with 500A/50mV current shunt(1,2)

(1) Programmable for different types of Lead Acid or Lithium batteries. (2) Enhanced battery monitoring (SOC%, Ah Charged, Net Battery Current).

1. 36-cell panels are typically referred to as “12V panels” providing Vmp/Voc of ~18V/22V at STC, 60-cell panels refers to "20V panels" (Vmp/Voc ~30V/37V), 72-cell panels refers to "24V panels" (Vmp/Voc ~36V/44V).
2. Factory default voltages unless programmed with an IPN ProRemote display, BT Connect, ProTouch, or UCM.
SpecificationSB3024(D)iL @12VSB3024(D)iL @24V
Maximum PV Power:1540W with 36-cell PV panel
400W with 60/72-cell PV panel		800W with 72-cell PV panel
Rated Battery (Output) Current:140A with 36-cell PV panel
30A with 60/72-cell PV panel		30A with 72-cell PV panel
Conversion Efficiency:97% (typical @28V/24A output)97% (typical @28V/24A output)
Power Consumption:0.35W (typical standby)0.35W (typical standby)
Recommended Max Panel Voc at STC:45.6V (Max Panel Input 57V) 45.6V (Max Panel Input 57V)
Battery Type:2Lead Acid (default) or LiFePO4 (set by microswitch) Lead Acid (default) or LiFePO4 (set by microswitch)
Charge Profile:Multi-Stage
(plus Equalization if enabled)		Multi-Stage
(plus Equalization if enabled)
Absorption Voltage:214.4V28.8V
Float Voltage:213.2V26.4V
Equalization Voltage (if enabled):215.2V30.4V
Auxiliary Output:A) Auxiliary Battery Charge 2A (2nd battery)
B) Load Control w/ LVD
C) Dusk-to-Dawn w/ LVD (by IPN Remote, BT Connect) 		A) Auxiliary Battery Charge 2A (2nd battery)
B) Load Control w/ LVD
C) Dusk-to-Dawn w/ LVD (by IPN Remote, BT Connect)
Load (LVD) Disconnect/Reconnect Voltage:211.5V / 12.6V 23.0V / 25.2V
Maximum Auxiliary Output Current (B or C):20A 20A
Display:Only version SB3024DiL or w/ remote display Only version SB3024DiL or w/ remote display
Temperature Compensation (by optional Battery Temperature Sensor): -5.00mV/°C/cell correct factor
(range 0.00mV/°C/cell to -8.00mV/°C/cell) 		-5.00mV/°C/cell correct factor
(range 0.00mV/°C/cell to -8.00mV/°C/cell)
Operating Temperature:-40°C - 40°C -40°C - 40°C
Maximum Full Power Ambient:40°C 40°C
Environmental Protection:IP20IP20
Weight:3.95lb (1.8kg) 3.95lb (1.8kg)
Dimensions:6.86" x 6.6" x 3.38"
(17.4cm x 16.8cm x 8.6cm) 		6.86" x 6.6" x 3.38"
(17.4cm x 16.8cm x 8.6cm)
Warranty:5 years5 years

SpecificationIPN ProRemote(-S)
Power Consumption0.25W (typical standby), 1.0W backlit ON
Battery AmmeterAccuracy +/- 1% FS / Range +/- 773.3A FS
Battery Size20 - 10,000Ah
Ah from Full 0 - 16,383Ah
Full Charge Determination Automatically matched to IPN setup
Remaining Battery Capacity 0-100% in 1% increments, self discharge rate and self tuning charge efficiency. Temperature compensated.
Lifetime Battery Ah 0Ah - 9,999,999Ah
Total Charge Ah 0 – 16,383Ah, user resettable
Days since Full Charge 0 - 255 days
Days since Full Equalize 0 - 255 days
BacklitCan be set to ON, OFF or AUTO
Communication and CablingCommunication via 25' (7.6m) RJ-11 4-pin telephone cable provided
Current Shunt(IPN ProRemote-S Only) 500A/50V Current Shunt via twisted pair cable
Operating Temperature -40°C - 40°C
Environmental ProtectionIP00
Weight0.35lb (160g)
Dimensions4.43" x 4.43" x 1.38" (11.2cm x 11.2cm x 3.5cm)
Warranty5 years

SpecificationsProTouch(-S)
Display:Touchscreen TFT 3.5”
Resolution:480 x 320 pixel
Power Consumption:Max. 1.5 W (100% backlite ON), Default 1.0 W (50% backlite ON)
Stand-by Consumption:0.45W
Battery Ammeter:Accuracy +/- 0.5% FS
Current Shunt:2-Position Terminal Connector (ProTouch-S)
Operating Temperature Range:-20°C, +70°C
Environmental Protection:IP20
Communication and Cabling:IPN Communication via 25' (7.6m) RJ-11 (4-pin telephone cable provided)
Weight:5.30Oz (150.2g)
Dimensions:2.81” x 5.51” x 1.59” (71.5mm x 140mm x 40.5mm)
Certifications:CE, FCC, RoHS
Warranty:5 years

5-Year Warranty (.pdf)
Return Policy (.pdf)
SKU Description Price Quantity
SB-RVK

SB3024iL and IPN ProRemote remote display for battery monitoring & settings

 $430
SB-RVK-S

SB3024iL and IPN ProRemote remote display w/ Current Shunt for enhanced battery monitoring & settings

 $470
SB-RVK-PT

SB3024iL and ProTouch 3.5″ touchscreen remote display for battery monitoring & settings

 $450
SB-RVK-PT-S

SB3024iL and ProTouch 3.5″ touchscreen remote display w/ Current Shunt for full battery monitoring & settings

 $490
Lithium
SKU Description Price Quantity
SB-RVK

SB3024iL and IPN ProRemote remote display for battery monitoring & settings

 $430
SB-RVK-S

SB3024iL and IPN ProRemote remote display w/ Current Shunt for enhanced battery monitoring & settings

 $470
SB-RVK-PT

SB3024iL and ProTouch 3.5″ touchscreen remote display for battery monitoring & settings

 $450
SB-RVK-PT-S

SB3024iL and ProTouch 3.5″ touchscreen remote display w/ Current Shunt for full battery monitoring & settings

 $490

You may also like…

  • Current Shunt

    500A/50mV Current Shunt
    Starting at $45 Buy Now This product has multiple variants. The options may be chosen on the product page

  • SB3024iL

    30A/40A MPPT Solar Charge Controller
    Starting at $290 Buy Now This product has multiple variants. The options may be chosen on the product page

  • SB3024DiL

    30A/40A MPPT Solar Charge Controller with Display
    Starting at $320 Buy Now This product has multiple variants. The options may be chosen on the product page

  • IPN ProRemote

    Flush mounting remote display for enhanced battery monitoring & settings
    Starting at $150 Buy Now This product has multiple variants. The options may be chosen on the product page

Related products