Starting at $110
The SC30 is our most affordable flush-mounting PWM charge controller, a solid controller for a wide range of applications and ideal for RV’s and Marine applications. This controller can be programmed via its onboard display, it is fully compatible with any lead-acid (FLA, AGM, Gel) or Lithium batteries. The LED display shows battery voltage, solar charge current, and total solar charge amp hours. A perfect entry-level controller for any application!
| Specification | SC30 |
|---|---|
| Maximum PV Power:1 | 450W with 36-cell PV panel |
| Rated Battery (Output) Current:1 | 30A with 36-cell PV panel |
| Power Consumption: | 0.17W (typical standby) |
| Recommended Max Panel Voc at STC: | 24V (Max Panel Input 30V) |
| Battery Voltage: | 12V nominal |
| Charge Profile:2 | Multi-stage (default Lead Acid) |
| Absorption Voltage:2 | 14.4V |
| Float Voltage:2 | 13.2V |
| Equalization Voltage (if enabled):2 | 15.2V |
| Display: | Yes, onboard display |
| Temperature Compensation (by optional Battery Temperature Sensor): | -5.00mV/°C/cell correct factor (range 0.00 to -8.00mV/°C/cell) |
| Operating Temperature: | -40°C - 45°C |
| Maximum Full Power Ambient: | 45°C |
| Environmental Protection: | IP10 |
| Weight: | 0.45lb (205g) |
| Dimensions: | 4.6" x 6.35" x 1.18" (11.8cm x 16.1cm x 3.0cm) |
| Warranty: | 5 years |
